# Adding cells volume information

**URL:** <https://openmc.discourse.group/t/adding-cells-volume-information/4157>\
**Category:** User Support\
**Created:** [April 12, 2024, 7:53pm UTC](https://openmc.discourse.group/t/adding-cells-volume-information/4157 "2024-04-12T19:53:29Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![josem](https://yyz2.discourse-cdn.com/free1/user_avatar/openmc.discourse.group/josem/32/4096_2.png) [@josem](https://openmc.discourse.group/u/josem)\
**Post date:** [April 12, 2024, 7:53pm UTC](https://openmc.discourse.group/t/adding-cells-volume-information/4157/1 "2024-04-12T19:53:29Z")

</div>

Is it possible to add cells volume information to the summary.h5 file? I tried to do it with:  
mycell = openmc.Cell(…)  
mycell.volume = x  
but I didn’t see the added volume appearing anywhere (or using to divide the scored ‘flux’).

---

<div class="post-metadata">

**Author:** ![wxinyan](https://avatars.discourse-cdn.com/v4/letter/w/e19adc/32.png) [@wxinyan](https://openmc.discourse.group/u/wxinyan)\
**Post date:** [April 17, 2024, 5:25pm UTC](https://openmc.discourse.group/t/adding-cells-volume-information/4157/2 "2024-04-17T17:25:31Z")

</div>

Hi Josem,

There’s no need to do it. Unlike MCNP, OpenMC reports the flux in unit “n\*cm/s”. You can divide them by the volume manually to get the true flux.

Xinyan

---

<div class="post-metadata">

**Author:** ![josem](https://yyz2.discourse-cdn.com/free1/user_avatar/openmc.discourse.group/josem/32/4096_2.png) [@josem](https://openmc.discourse.group/u/josem)\
**Post date:** [April 17, 2024, 10:14pm UTC](https://openmc.discourse.group/t/adding-cells-volume-information/4157/3 "2024-04-17T22:14:10Z")

</div>

Hi Xinyan,  
You’re right but, what is then the purpose of the variable volume, available in class openmc.Call()?  
JM
